MP66/112 High Power Full Waterproof Electric Hydrofoil Surfboard Thruster Special Motor For Underwater Robot
The motor kit has strong power, high torsion and high-speed operation, which is suitable for surfing boat underwater propulsion. Recommended for electric boat prototypes (airfoil, jet surfing, etc.)
The waterproof level reaches IP68, and it can be used underwater for a long time, effectively protecting the motor from seawater corrosion.
The solder joints of the motor leads are potted inside the motor, which can meet the 200m suppression test.
There is connecting ring at the upper and lower positions of the magnet, which can be used to lock the magnet and prevent the magnet from falling.
The bearing is made of stainless steel, resistant to impact and corrosion, and effectively prolongs its service life.
Material: stainless steel + copper
Size: Approx. 66 x 112mm / 2.6 x 4.4inch
Motor Stator Slot: 12
Shaft Diameter: approx. 10mm / 0.4inch
Number of Motor Poles: 8
Motor Wire: 12AWG Wire
Maximum Voltage: 14S
Maximum Current: 70A
No-Load Current: 2.2A 10V
Waterproof Rating: IP68
The Thrust Under The Conditions Of Reaching This Voltage And Current is as follows:
48.5v 2.7A 5kg
48.5v 8.2A 10kg
48.5v 18.2A 15kg
48.5v 20A 17kg
48.5v 25A 19kg
48.5v 30A 21kg
48.5v 35A 23kg
48.5v 40A 24kg
48.5v 51A 27kg
1 Piece Motor
1 Piece Propeller